Connecting Web Viewer - Samsung SRD-830 User Manual

COnneCtInG weB VIeweR

1. Open your web browser and type the IP address or URL
of DVR into the URL address box.
M
The basic URL of the DVR is as following in case of MAC
address :
`
00-00-F0-ab-cd-ef : nabcdef.websamsung.net
`
00-16-6c-ab-cd-ef : mabcdef.websamsung.net
`
00-68-36-ab-cd-ef : pabcdef.websamsung.net
`
You can also use registered URL which setups up in the Setup menu of your DVR.
2.
Set the Admin ID and password same to those of the DVR
Admin.
For general users, enter the DVR user ID and password.
M
`
It allows up to 10 simultaneous access including the Admin
and general users.
`
It does not allow multiple login of the Admin user.
`
Initial password of the Admin user is set to "4321".
`
Password of the Admin and general users can be changed in <Permission Management> menu of the DVR.
`
Normal users should have set <Viewer> under <Permission Management> to "Use" before connecting to the
Web Viewer. (Page 41)
`
All settings are applied by the DVR's settings.
3. Click <Install ActiveX Control...>.
4.
Click <Install>.
5.
Click <Install>.
English _75