Event Monitoring - Samsung SRD-830 User Manual

event monitoring

This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs.
CH3
In "monitor > event display", set the event monitoring to ON/OFF and specify the event display time. (Page 52)
CH1 CH2
H3
If multiple events occur simultaneously, the screen will switch to a split mode.
~
CH6
- 2~4 events : 4-split mode
CH1 CH2
- 5~9 events : 9-split mode
H6
- 10~16 events : 16-split mode
CH9 CH3 CH4
If the second event occurs within the set time of <event display>, the first event will last until the second
~
H9 CH3 CH4
CH10
one is terminated. (Page 52)
Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.
`
CH12 Event occurrence
CH10
Ex : If you set <Event Display> to 5 seconds, and the second event occurs in CH 2 within the set time after the first
`
event occurred in CH 1.
CH10 CH13
CH12 Event occurrence
CH12 CH15
CH1
M
CH13 CH14
CH15 CH16
CH1
CH13 CH14
CH14
CH15 CH16
CH16
CH1
Press the [ALARM] button to reset the alarm settings and to release the event mode.
`
If an alarm activates in the condition you have set the event record, and pre/post alarm times, the event record will
`
be performed.
This will also apply to the Spot Out monitor.
`
5 seconds
Stop alarm
CH1 CH2
4 seconds
CH1 CH2
CH1 CH2
9 seconds
Stop alarm
English _