Operating The Secure Km Switch - Belkin F1DN104K User Manual

OPERATING THE SECURE KM SWITCH

SECTIONS
Table of Contents
Selecting One of the Predefined Setups
To load one of the default settings available in the non-volatile
memory of the Switch:
1. Select a default configuration type on the console keyboard by
pressing the following keys in this sequence: Control, Control,
F11, Fx (refer to figure 3). For example: The key sequence Control,
Control, F11, F2 will set the displays laid out horizontally, with the
left-most display to computer #1, the second display as computer
#2, the third display as computer #3, and the fourth display to
computer #4.
2. Power-cycle the Switch by disconnecting the power plug and
reconnecting to the Switch.
3. The Switch will boot with the new configuration.
Note: Additional settings can be accessed through Control, Control,
F11, x, x (refer to figures 5 and 6).
Advanced Secure Keyboard/Mouse (KM) Switch
1 2 3 4 4 5
The loaded configuration will also include the following settings
by default:
• All displays are 1920 x 1200 resolution, same size (26" diagonal)
• Mouse acceleration is set to 6
• Mouse speed is set to 5
• SCS is enabled
• Prevent transition while dragging feature is enabled
26
6 7 8 9