HOW TO MAKE COPIES
●
HOW TO MAKE COPIES
Before Making Copies
Forgery prevention function
This equipment has a forgery prevention function. Therefore,
scan or copy function might not operate correctly.
1
Placing Originals
Acceptable originals
When the RADF (Reversing Automatic Document Feeder) is
used, 2-sided originals can be automatically scanned one
sheet after another. When the original glass is used, originals
2
such as OHP films, tracing paper, booklet or 3-dimensional
objects, that cannot be placed on the RADF can be scanned,
as well as plain paper.
Maximum
Location
size
Original glass Length:
3
216mm
(8.5")
Width:
355.6mm
(14")
RADF
Legal 14
4
(8.5 x 14")
5
6
Note
• Automatic size detection does not work properly when A/B
format originals are used in equipment for North America. It
does not work properly when LT format originals are used in
equipment other than that for North America.
• In some models, automatic size detection does not work
properly when K format paper is used for printing. (K format
is a standard paper size in China.)
Paper weight
Original size
-
A/B format:
A4, A5, A6, B5,
Folio, 16K
LT format:
Letter, Legal,
Legal 13, Legal
13.5, EX, ST,
8.5SQ-R
1-sided originals:
2
60 - 105 g/m
A/B format:
(16 - 28lb.)
A4, A5, A6, B5,
Folio, 16K
LT format:
Letter, Legal,
Legal 13, Legal
13.5, Legal 14
EX, ST, 8.5SQ-R
2-sided originals:
A/B format:
A4, A5, B5, Folio,
16K
LT format:
Letter, Legal,
Legal 13, Legal
13.5, EX, ST,
8.5SQ-R
• Do not place any heavy objects (8 Kg(18lb.) or over) on the
original glass and do not press on it with force.
• When using the RADF, be sure to place A5-size originals in
a landscape direction, aligning the guides.
• A maximum of 1000 sheets can be scanned per 1 copy job
or up until the embedded memory becomes full.
Placing originals on the original glass
The original glass can be used for originals such as OHP films
or tracing paper, as well as plain paper, that cannot be placed
on the RADF.
Do not place any heavy objects (8 Kg(18lb.) or over) on the
original glass and do not press on it with force.
Breaking the glass could injure you.
1
Raise the RADF.
2
Place the original with its face down on the
original glass and align it with the left rear
corner of the glass.
When you copy highly transparent originals
When you copy highly transparent originals such as OHP
films or tracing paper, place a blank sheet, which is the
same size as the original or larger, over the original.
3
Lower the RADF carefully.
- 28 -