Brother HL-2030 Service Manual page 54

CHAPTER 2 INSTALLATION AND BASIC OPERATION
LED
Fig. 2-27
Fig. 2-28
Fig. 2-29
Drum life end soon
The drum unit is near the end of its life. We recommend that
you obtain a new drum unit to replace the current one. See
'Drum Unit' in Chapter 5.
The Drum LED alternates turning on for 2 seconds and off for 3
seconds alternately.
No paper
Load paper in the printer. Then press the Go button.
Front Cover Open
Close the front cover of the printer.
Back Cover Open
Close the back cover of the printer.
Jam
Clear the paper jam. If the printer does not start printing, press
Go button.
Manual feed
Put the paper in the manual feed slot.
Memory full
The printer memory is full and the printer is unable to print the
page.
Print overrun
The printer memory is full and the printer is unable to print the
page.
Dust on drum
The corona wire needs to be clean. See
Corona Wire ' in Chapter 5.
2-24
Printer status
3.2 'Cleaning the
1.1
Confidential