Brother HL-2030 Service Manual page 43

CHAPTER 2 INSTALLATION AND BASIC OPERATION
For network users (HL-2070N only)
Connect the printer to the Macintosh & install the BR-Script PPD file
<For Mac OS
(1) Click Install Printer Driver on the Menu screen.
(2) Click the Network interface and follow the on screen instructions.
(3) Turn off the printer power switch.
(4) Connect the network interface cable to the printer, and then connect it to a free port on
your hub.
(5) Turn on the printer power switch.
(6) From the Go menu, select Applications.
(7) Open the Utilities folder.
(8) Double-click the Printer Setup Utility icon.
(9) Click Add. Make the following selection.
(10) Select Brother HL-2070N series, and the click the Add button.
NOTE:
If there is more than one of the same model printer (HL-2070N) connected on your network,
the Ethernet address (MAC address) will be displayed after the model name.
(11) From the Printer Setup Utility menu, select Quit Printer Setup Utility.
(12) The setup is now complete.
<For Mac OS
(1) Turn off the printer power switch.
(2) Connect the network interface cable to the printer, and then connect it to a free port on
your hub.
(3) Turn on the printer power switch.
(4) Insert the CD-ROM into your CD-ROM drive. Open the Mac OS 9 folder.
(5) Open your language folder.
(6) Double-click the Printer Driver Installer icon to install the printer driver. Follow the on-
screen instructions.
(7) From the Apple menu, open the Chooser.
(8) Click the Brother Laser (IP) icon, and then select BRN_xxxxxx. Click the Setup...
button.
* xxxxxx are the last six digits of the Ethernet address.
(9) Click the OK button. Close the Chooser. The setup is now complete.
.
®
X 10.2.4 or greater Users>
®
9.1 to 9.2 Users>
2-12
Confidential