CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(5) Remove the two PR arm ASSY and two PR bush from the pressure roller.
PR bush
(6) Release each hook of the springs from the fuser frame and remove the four separate claw
ASSYs.
NOTE:
Be careful not to damage the heat roller when removing the separate claw ASSY.
Separate claw ASSY
PR arm ASSY
Fig. 4-25
Fuser frame
1
2
A lign the separate claw ASSY with
the shape of the fuser frame to remove.
Fig. 4-26
4-16
Pressure roller
PR bush
PR arm ASSY
Heat roller
Separate claw ASSY
Confidential