Switching Graphic Display; Menu System; Illumination Color Setting; Contrast Adjustment - Kenwood KRC-V791 Instruction Manual

Menu system

Switching Graphic Display

Setting the graphic part display ON/OFF.
Display
"Graphic ON"
"Graphic OFF"

Illumination Color Setting

You can set the display to a desired color.
1
Select Illumination Color Setting Mode
Press the [FM] or [AM] button.
Select the "COL" display.
2
The color continues to change gradually
Continue pressing the [4] or [¢] button.
Release your finger at the color you want.
Quick call up the preset color
Press the [#1] — [#4] button.
Button
[#1]
[#2]
[#3]
[#4]
Selecting the Color mode
Press the [#6] button.
Each time the button is pressed the Color mode switches as
shown below.
Setting
The graphic part is displayed.
The graphic part isn't displayed.
Function of the KRC-V791
Color
Silky White
Red
Blue
Blue Green
Display Color mode
"Scan" The color changes in sequence.
"SRC" The color changes according to the selected source.
"Time" The color changes every six hours.
Keeps the presently set color.
Blue fine adjustment
1 Press the [#3] button for at least 2 seconds.
2 Press the [4] or [¢] button.
When the blue fine adjustment is completed, press the [#3]
button.
The set color memory
Press the [#5] button for at least 2 seconds.
When the setting in the memory is called up press the [#5]
button.
The blue fine adjustment setting cannot be stored in memory.

Contrast Adjustment

Adjusting the display contrast.
Display and Setting
"Contrast 0"
"Contrast 5" (Original setting)
"Contrast 10"
— 26 —