Switching Display; Station/Disc Naming (Snps/Dnps) - Kenwood 00271-13000 Instruction Manual

General features

Switching Display

Switching the information displayed.
Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
In Tuner source
Information
Frequency
Station name
Clock
In CD & External disc source
Information
Track number
Disc name
Disc title
Track title
Track number & Track Time
Clock
In MP3 source
Information
Track number
Disc name
Folder name
File name
Song title & Artist name
Album name & Artist name
Track Time
Clock
Display
"SNPS"
Display
"DNPS"
"D-TITLE"
"T-TITLE"
Display
"DNPS"
"FOL NAME"
"FIL NAME"
"TITLE"
"ALBUM"
— 12 —

Station/Disc Naming (SNPS/DNPS)

Attaching a title to a Station or CD.
1
Receive/play the station/disc you want to attach a title to
• A title can't be attached to a MD.
• Disc Naming can't be done during CD text display.
2
Enter name set mode
Press the [NAME] button for at least 2 seconds.
"NAME SET" is displayed.
3
Move the cursor to the enter character position
Press the [4] or [¢] button.
4
Select the character type
Press the [38] button.
Each time the button is pressed the character type switches as
shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
5
Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number
buttons.
Example: If "DANCE" is entered.
Character Button
"D" [#3]
"A" [#2]
"N" [#6]
"C" [#2]
"E" [#3]
#Times pressed
1
1
2
3
2