Hard Drive - HP dv6000 Maintenance And Service Manual

Hard drive

NOTE:
All hard drive spare part kits include a hard drive bracket.
Description
200-GB, 4200-rpm
160-GB, 5400-rpm
120-GB, 5400-rpm
80-GB, 5400-rpm
60-GB, 5400-rpm
Before removing the hard drive, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the hard drive:
Position the computer with the front toward you.
1.
Loosen the two Phillips PM2.0×5.0 screws (1) that secure the hard drive cover to the computer.
2.
Lift the right side of the hard drive cover (2), swing it to left, and remove the cover.
3.
NOTE:
ENWW
Battery on page
The hard drive cover is included in the Plastics Kit, spare part number 438368-001.
40).
Component replacement procedures
Spare part number
441424-001
438485-001
446498-001
446497-001
446496-001
45