Switch Cover - HP dv6000 Maintenance And Service Manual

Switch cover

Description
Switch cover (includes LED board and cable)
Before removing the switch cover, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the switch cover:
Remove the three Phillips PM2.5×5.0 screws that secure the switch cover to the computer.
1.
Turn the computer display-side up, with the front toward you.
2.
Open the computer as far as possible.
3.
54 Chapter 4 Removal and replacement procedures
Battery on page 40).
Spare part number
446512-001
ENWW