HP dv6000 Maintenance And Service Manual page 56

Lift the left side of the cover (2), swing it to the right, and remove the cover.
3.
NOTE:
number 438368-001.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
4.
(The edge of the module opposite the slot rises away from the computer.)
Remove the module (2) by pulling it away from the slot at an angle.
5.
NOTE:
memory module slot.
Reverse this procedure to install a memory module.
48 Chapter 4 Removal and replacement procedures
The memory/WLAN module compartment cover is included in the Plastics Kit, spare part
Memory modules are designed with a notch (3) to prevent incorrect installation into the
ENWW