Status - Buffalo TeraStation III iSCSI TS-IXL User Manual

Restore/Erase
Restore Factory Defaults
Erase
Ping Test
Ping Test
Ping Test

Status

System
System Information
System
Network
Network Information
Network
Connection History
Connection History
Connection History
TeraStation III iSCSI User Manual
Restore TeraStation Click Restore TeraStation to initialize the following settings: TeraStation Name, NTP
Settings, RAID Scanning, Upon restore, Email Notification Settings, UPS Settings,
Administrator Settings, Network Settings (IP Address, Subnet Mask, etc.), Alert
Sound Settings, Front Panel Settings, RAID Array Failure Settings, Management
Information, Languages Settings, Syslog
You may choose to not initialize the admin username and password when other
settings are initialized from the front panel button. Click Modify Settings to change
this setting. If you select Keep current admin password, you will not be able to
make any further changes to the settings of the TeraStation without the admin
username and password. Write them down and do not lose them!
Erase Clicking Erase will erase data on the drives on the TeraStation completely. All data
and settings will be lost. Back up any important data before! You cannot change
the configuration of the TeraStation while erasing data.
Enter the target IP Address in Target IP Address, and click Ping. The response is displayed in Result.
Displays TeraStation Name, Model Name, Firmware version, NTP, Date and Time,
Time Zone, Email Notification, Fan Status, etc.
Displays MAC Address, IP Address, Subnet Mask, Ethernet Frame Size, Primary DNS
Server, Secondary DNS Server, Default Gateway Address, Port Trunking, etc.
Displays Date/Time, Status, Volume Name and "Initiator Name.
54