Jumbo Frame - Buffalo TeraStation III iSCSI TS-IXL User Manual

Jumbo Frame

If all of your network devices support Jumbo Frame, enabling them can make your network faster. To configure Jumbo
Frame on the TeraStation, navigate to Basic - Network - Ethernet Frame Size in Settings. Click Modify Settings, and change
the Ethernet frame size to one of Jumbo Frame settings: 4120, 7422, or 9694 bytes.
To configure Jumbo Frame settings, you will need to turn off iSCSI Service, then turn it back on once changes have been
made.
Caution:
If you enable Jumbo Frame but some of your network devices don't support it, you may not be able to transfer data. If
you run into compatibility issues, disable Jumbo Frame and set all of your network devices to use standard transmission
(1518 bytes).
Connection
TeraStation
Jumbo Frame
(4120/7422/9694)
TeraStation
Jumbo Frame
(4120/7422/9694)
TeraStation
Jumbo Frame
(4120/7422/9694)
TeraStation
Jumbo Frame
(4120/7422/9694)
TeraStation III iSCSI User Manual
Jumbo Frame Jumbo Frame
Supported Supported
Jumbo Frame Jumbo Frame
Supported Not supported
Jumbo Frame Jumbo Frame
Not supported Not supported
Jumbo Frame Jumbo Frame
Not supported Supported
Transmission
Transmit
Jumbo Frame
(4120/7422/9694)
Transmit
normally (1518)
Transmit
normally (1518)
No transmission
42