Create Volume - Buffalo TeraStation III iSCSI TS-IXL User Manual

Create Volume

By default, the TeraStation is configured with a single volume using all available space on the TeraStation. If you delete
the factory-set volume, you will then have the capacity to create up to 32 new volumes. Different volumes can be con-
nected to different computers, but each volume can only be connected to a single computer.
Notes:
• Deleting the default volume will delete all data from the TeraStation. Back up any important data before making any
configuration changes!
• LVM must be enabled in order to delete or create volumes. Refer to page 14.
1
2
3
4
Click Save.
5
T ur n i S C S I S erv ice back o n .
Note:
To start iSCSI service for the target volume only, navigate to iSCSI Volumes - iSCSI Volumes, select the target
volume, and click Activate.
You have created a new volume.
Note:
To use the new volume, you need to connect it (page 11), and format it with Disk Management on Windows. You may
open Disk Management from the iSCSI Connection Tool by clicking Disk management from the Configuration menu.
TeraStation III iSCSI User Manual
Turn off iSCSI Service on the left side of Settings.
Note:
To stop iSCSI service for the target volume only, navigate to
iSCSI Volumes - iSCSI Volumes, select the target volume, and click
Inactivate.
Navigate to iSCSI Volumes - iSCSI Volumes. Highlight the default
volume and click Delete Volume. Then, click Create Volume.
Enter Volume Name, Volume Description, Disk Area, and Size.
15