Receive Mode Settings; Ring Delay; F/T Ring Time (Fax/Tel Mode Only) - Brother MFC-J200 User Manual

Receive Mode settings

Ring Delay

The Ring Delay sets the number of times the
machine rings before it answers in Fax Only
or Fax/Tel mode. If you have external or
extension telephones on the same line as the
machine, choose the maximum number of
rings.
(See Operation from external and extension
telephones on page 33 and Fax Detect
on page 28.)
a
Press (FAX).
b
Press Menu, 3, 1, 2.
c
Press a or b to choose how many times
you want the machine to ring before it
answers.
Press OK.
If you choose 00, the machine will
answer immediately and the line will not
ring at all.
d
Press Stop/Exit.
F/T Ring Time
5
(Fax/Tel mode only)
When somebody calls your machine, you and
5
your caller will hear the normal telephone
ring. The number of rings is set by the ring
delay setting.
If the call is a fax, then your machine will
receive it. However, if it is a voice call then the
machine will sound the F/T Ring (a fast
double-ring) for the time you have set in the
F/T Ring Time setting. If you hear the F/T
Ring, it means that you have a voice caller on
the line.
Because the F/T Ring is made by the
machine, extension and external telephones
will not ring. However, you can still answer
the call on any telephone by using a remote
code.
(For more information, see Using remote
codes on page 34.)
a
Press
b
Press Menu, 3, 1, 3.
c
Press a or b to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or
70 seconds).
Press OK.
d
Press Stop/Exit.
NOTE
Even if the caller hangs up during the fast
double-ring, the machine will continue to
ring for the set time.
Receiving a fax
(FAX).
5
5
27