Introduction
Thank you for your purchase of a StarTech.com PEX1S552/PEX2S552/
PEX2S5521P Dual Profile PCI Express card. This convenient I/O solution
utilizes a native, single-chip design for maximum performance and reli-
ability, and includes an optional low profile bracket that allows the card to
be installed in virtually any size/form factor case.
Features
•
Native PCI Express (single chip)
•
Adds two high speed RS-232 serial ports, one parallel port
•
Supports data transfer rates of up to: 2.7 Mbps (parallel)
•
Configurable in 5V, 12V, and RI (non-powered) modes
•
Compliant with PCI Express base specifications revision 1.0a
•
128-byte deep FIFO per transmitter and receiver
•
Automated in-band flow control using programmable Xon/Xoff in both
directions
•
Automated out-of-band flow control using CTS/RTS and DSR/DTR
•
Standard and low profile bracket included
Package Contents
•
1 x 2 Port PCI-Express RS-232 Serial Card
•
1 x Separate parallel port (with ribbon cable)
•
1 x Driver CD
•
1 x Instruction Manual
•
Low Profile Brackets:
Instruction Manual
PEX1S552 - 1 low profile bracket included
PEX2S552 - 2 low profile brackets included
PEX2S5521P – 3 low profile brackets included
1
460.8 Kbps (serial)
Need help?
Do you have a question about the PEX2S5521P and is the answer not in the manual?