Troubleshooting - Honeywell Dolphin 7850 User Manual

Honeywell international inc. mobile computer user's guide
Hide thumbs Also See for Dolphin 7850:
Table of Contents

Advertisement

Troubleshooting

If you encounter problems with your QuadCharger device, refer to chart below for possible solutions. If
problems persist, please contact
Problem
The Status LED does not come on
when I insert a battery pack into
the QuadCharger device.
The Status LED lights red during
charging.
The Status LED lights red and
stays on without a battery in the
charging slot.
Dolphin® 7850 Mobile Computer
User's Guide
Limited Warranty
(see page 13-3).
Issue
Check the power connections on the QuadCharger device; make
sure the POWER switch is ON and the battery pack is properly
seated.
Try to charge the battery in one of the other charging slots. If the
Status LED lights red again, then the problem is associated with
the battery pack.
An error occurred during the self-diagnostic test for that particular
charging pocket. Call Honeywell Product Service and request an
RMA.
For additional warranty and return information, see
Support and Warranty
Rev C
4/30/2008
on page
13-1.
Customer
10 - 7

Advertisement

Table of Contents
loading

Table of Contents