Honeywell Dolphin 7850 User Manual page 111

Wall Mounting
A wall mount kit that contains a screws and a mounting bracket can be purchased separately. The bottom
panel of the HomeBase device contains four(4) rubber feet–one at each corner–that help keep it stable
and secure when resting on a flat surface. Those rubber feet should be removed with pliers before wall
mounting the HomeBase device.
1. Secure screws to the bottom panel by sliding them into the available slots.
2. Attach the bottom panel to the mounting bracket matching the holes to the secured screws.
3. Fasten the screws to secure the HomeBase device to the mounting bracket.
4. Turn the secured HomeBase device right side up.
5. Using the appropriate screws, secure the mounting bracket to the wall or vertical surface as shown.
Dolphin® 7850 Mobile Computer
User's Guide
Rev C
4/30/2008
9 - 11