Advertisement
WiFly QA5 IP
3. When "G.XXX" is displayed you are in Green dimming mode.
Press the UP and DOWN buttons to adjust intensity.
4. When "b.XXX" is displayed you are in Blue dimming mode. Press
the UP and DOWN buttons to adjust intensity.
5. When "A.XXX" is displayed you are in Amber dimming mode.
Press the UP and DOWN buttons to adjust intensity.
6. After you have adjusted the RGBA colors to make your desired
color you can then activate strobing by pressing the SET UP but-
ton to enter the Flash (strobe) mode.
7. "FS.XX" will be displayed, this is Flash mode. The Flash can be
adjusted between "FS.00" (flash off) to "FS.15" (fastest flash).
Auto Change Mode:
1. Plug the fixture in and press the MODE button until "AJXX" is
displayed. "XX" is the displayed Color Change program that is
running.
2. Use the UP and DOWN button to scroll through the different pro-
grams.
3. After you have chosen your desired program press the SET UP
button. "SP.XX" will be displayed. When this is displayed you
can adjust the running speed of your selected program. Use the
UP or DOWN button to adjust the speed between "SP.01" (slow-
est) and "SP.16" (fastest). Once you have set your desired running
speed, press the SET UP button to return to your selected Auto
Change Mode.
Auto Fade Mode:
1. Plug the fixture in and press the MODE button until "AFXX" is
displayed. "XX" is the displayed Color Change program that is
running.
2. Use the UP and DOWN button to scroll through the different pro-
grams.
3. After you have chosen your desired program press the SET UP
button. "SP.XX" will be displayed. When this is displayed you
can adjust the running speed of your selected program. Use the
UP or DOWN button to adjust the speed between "SP.01" (slow-
est) and "SP.16" (fastest). Once you have set your desired running
speed, press the SET UP button to return to your selected Auto
Fade Mode.
ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 8
Operating Instructions
WiFly QA5 IP
Auto Run Mode:
1. Plug the fixture in and press the MODE button until "Auto" is
displayed.
2. To adjust the running speed of the Auto mode press the SET UP
button. "SP.XX" will be displayed. When this is displayed you
can adjust the running speed of your selected program. Use the
UP or DOWN button to adjust the speed between "SP.01" (slow-
est) and "SP.16" (fastest). Once you have set your desired running
speed, press the SET UP button to return to Auto Run Mode.
Static Color Mode:
1. Plug the fixture in and press the MODE button until "CLXX" is
displayed. "XX" represents the current color number displayed.
2. There are 64 colors to choose from. Select your desired color by
pressing the UP and DOWN buttons. After you have selected
your desired color you can activate strobing by pressing the SET
UP button to enter the Flash (strobe) mode.
3. "FS.XX" will be displayed, this is Flash mode. The Flash can be
adjusted between "FS.00" (flash off) to "FS.15" (fastest flash).
DMX Mode:
Operating through a DMX controller gives the user the freedom to
create their own programs tailored to their own individual needs.
This function also allows you to use your fixtures as spot lights. The
WiFly QA5 IP has 5 DMX modes: 4 Channel mode, 5 Channel mode,
6 Channel mode, 10 Channel mode, and a 11 Channel mode. See
pages 18-23 for each modes' DMX traits.
1. This function will allow you to control each individual fixture's
traits with a standard DMX 512 controller.
2. To run your fixture in DMX mode press the MODE button until
"d.XXX" is displayed. "XXX" represents the current displayed ad-
dress. Use the UP or DOWN buttons to select your desired DMX
address. then press the SET UP button to select your DMX
Channel mode.
3. When you press SET UP "ChXX" should be displayed. "XX" repre-
sent the current DMX Channel Mode.
4. Use the UP or DOWN buttons to scroll through the DMX Channel
ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 9
Operating Instructions
Advertisement
