Sound Active Mode; Auto Run Mode; Static Color Mode - ADJ MEGA 64 PROFILE PLUS User Instructions

Mega 64 Profile Plus
4. When "b.XXX" is displayed you are in Blue dimming mode. Press the
UP and DOWN buttons to adjust intensity.
5. When "u.XXX" is displayed you are in UV dimming mode. Press the
UP and DOWN buttons to adjust intensity.
6. After you have adjusted the RGB+UV colors to make your desired
color you can then activate strobing by pressing the SET UP button
to enter the Flash (strobe) mode.
7. "FS.XX" will be displayed, this is Flash mode. The Flash can be
adjusted between "FS.00" (flash off) to "FS.15" (fastest flash).

Sound Active Mode:

In this mode the Mega 64 Profile Plus will react to sound, and chase
through the different colors.
1. Plug the fixture in and press the MODE button until "So-X" is dis-
played. "X" represents the sound active mode (1-16) currently dis-
played. Use the UP or DOWN buttons to find your desired sound
active mode.
2. Press the SET UP button to adjust the sound sensitivity. "SJ-X"
should be displayed. Use the UP or DOWN buttons to adjust the
sensitivity. "SJ-1" is the lease sensitive, "SJ-8" is the most sensitive.

Auto Run Mode:

There are 3 types of Auto Run Modes to choose from; Color Fade,
Color Change, and both modes running together. The running speed
is adjustable in all 3 modes.
1. Plug the fixture in and press the MODE button until either "AF-X",
"AJ-X", or "A-JF" is displayed.
• AF-X = Color Fade mode, there are 16 Color Fade modes to choose
from. Use the UP or DOWN buttons to scroll through the different
Auto Fade modes.
• AJ-X = Color Change mode, there are 16 Color Change modes to
choose from. Use the UP or DOWN buttons to scroll through the
different Auto Change modes.
• A-JF = Both Color Fade and Color Change modes running.
2. After you have chosen your desired running mode press the SET UP
button until "SP.XX" is displayed. When this is displayed you can
adjust the running speed of your desired program. Use the UP or
DOWN button to adjust the speed between "SP.01" (slowest) and
"SP.16" (fastest). Once you have set your desired running speed,
press the SET UP button to return to your desired Auto Run Mode.
ADJ Products, LLC - www.adj.com - Mega 64 Profile Plus User Manual Page 8
Operating Instructions Mega 64 Profile Plus

Static Color Mode:

1. Plug the fixture in and press the MODE button until "CL-X" is dis-
played.
2. There are 64 colors to choose from. Select your desired color by
pressing the UP and DOWN buttons. After you have selected your
desired color you can activate strobing by pressing the SET UP but-
ton to enter the Flash (strobe) mode.
3. "FS.XX" will be displayed, this is Flash mode. The Flash can be
adjusted between "FS.00" (flash off) to "FS.15" (fastest flash).
DMX Mode:
Operating through a DMX controller gives the user the freedom to create
their own programs tailored to their own individual needs. This function
also allows you to use your fixtures as spot lights. The Mega 64 Profile
Plus has 5 DMX modes: 4 Channel mode, 5 Channel mode, 6 Channel
mode, 9 Channel mode, and a 10 Channel mode. See pages 14-21 for
each modes' DMX traits.
1. This function will allow you to control each individual fixture's traits
with a standard DMX 512 controller.
2. To run your fixture in DMX mode press the MODE button until
"d.XXX" is displayed. "XXX" represents the current displayed ad-
dress. Use the UP or DOWN buttons to select your desired DMX
address, then press the SETUP button to select your DMX Channel
mode.
3. Use the UP or DOWN buttons to scroll through the DMX Channel
modes. The Channel modes are listed below:
To run the 4 Channel Mode, press the MODE button until "Ch04"
is displayed. This is the 4 Channel DMX Mode.
To run the 5 Channel Mode, press the MODE button until "Ch05"
is displayed. This is the 5 Channel DMX Mode.
To run the 6 Channel Mode, press the MODE button until "Ch06"
is displayed. This is the 6 Channel DMX Mode.
To run the 9 Channel Mode, press the MODE button until "Ch09"
is displayed. This is the 9 Channel DMX Mode.
To run the 10 Channel Mode, press the MODE button until "Ch10"
is displayed. This is the 10 Channel DMX Mode.
4. Please see pages 14-21 for DMX values and traits.
5. After you have chosen your desired DMX Channel mode plug in
the fixture via the XLR connections to any standard DMX controller.
ADJ Products, LLC - www.adj.com - Mega 64 Profile Plus User Manual Page 9
Operating Instructions