Table of Contents
Advertisement
Flat Par QA5XS
most sensitive.
Static Color Mode:
1. Plug the fixture in and press the MODE button until "CLXX" is dis-
played.
2. There are 15 colors to choose from. Use the UP and DOWN buttons
to scroll through the 15 colors. After you have found your desired
color you can activate strobing by pressing the SET UP button to
enter the Flash (strobe) mode.
3. "FS.XX" will be displayed, this is Flash mode. The Flash can be
adjusted between "FS.00" (flash off) to "FS.15" (fastest flash).
Auto Mode:
There are 3 different Auto Modes to choose from; Color
Fade, Color Change, and both modes running together. The running
speed is adjustable in all 3 modes.
1. Plug the fixture in and press the MODE button until either "AFXX",
"AJXX", or "A-JF" is displayed. Press the SET UP button to scroll
through the 3 different modes.
•
AFXX = Color Fade mode, there are 16 Color Fade modes to choose
from. Use the UP or DOWN buttons to scroll through the different
Auto Fade modes.
•
AJXX = Color Change mode, there are 16 Color Change modes to
choose from. Use the UP or DOWN buttons to scroll through the
different Auto Change modes.
•
A-JF = Both Color Fade and Color Change modes running.
2. After you have chosen your desired Auto Mode press the SET UP
button until "SP.XX" is displayed. When this is displayed you can
adjust the running speed of your Auto Mode. Use the UP or DOWN
button to adjust the speed between "SP.01" (slowest) and "SP.16"
(fastest). Once you have set your desired running speed, press the
SET UP button to return to your desired Auto Mode.
RGBA Dimmer Mode:
1. Plug the fixture in and press the MODE button until:
2. When "r.XXX" is displayed you are in Red dimming mode. Press the
UP and DOWN buttons to adjust intensity. After you have finished
adjusting the intensity, or you would like to skip to the next color,
press the SET UP button.
3. When "G.XXX" is displayed you are in Green dimming mode. Press
the UP and DOWN buttons to adjust intensity.
4. When "b.XXX" is displayed you are in Blue dimming mode. Press the
ADJ Products, LLC - www.adj.com - Flat Par QA5XS User Manual Page 8
Operating Instructions
Flat Par QA5XS
UP and DOWN buttons to adjust intensity.
5. When "A.XXX" is displayed you are in Amber dimming mode. Press
the UP and DOWN buttons to adjust intensity.
6. After you have adjusted the RGBA colors to make your desired color
you can then activate strobing by pressing the SET UP button to
enter the Flash (strobe) mode.
7. "FS.XX" will be displayed, this is Flash mode. The Flash can be
adjusted between "FS.00" (flash off) to "FS.15" (fastest flash).
DMX Mode:
Operating through a DMX controller gives the user the freedom to create
their own programs tailored to their own individual needs. This function
also allows you to use your fixtures as spot lights. The Flat Par QA5XS
has 8 DMX modes: 1 Channel mode, 2 Channel mode, 3 Channel mode,
4 Channel mode, 5 Channel mode, 6 Channel mode, 7 Channel mode
and a 8 Channel mode. See pages 15-20 for each modes' DMX traits.
1. This function will allow you to control each individual fixture's traits
with a standard DMX 512 controller.
2. To run your fixture in DMX mode press the MODE button until
"d.XXX" is displayed. "XXX" represents the current displayed ad-
dress. Use the UP or DOWN buttons to select your desired DMX
address, then press the SETUP button to select your DMX Channel
mode.
3. Use the UP or DOWN buttons to scroll through the DMX Channel
modes. The Channel modes are listed below:
To run the 1 Channel Mode, press the MODE button until "Ch.01"
is displayed. This is the 1 Channel DMX Mode.
To run the 2 Channel Mode, press the MODE button until "Ch.02"
is displayed. This is the 2 Channel DMX Mode.
To run the 3 Channel Mode, press the MODE button until "Ch.03"
is displayed. This is the 3 Channel DMX Mode.
To run the 4 Channel Mode, press the MODE button until "Ch.04"
is displayed. This is the 4 Channel DMX Mode.
To run the 5 Channel Mode, press the MODE button until "Ch.05"
is displayed. This is the 5 Channel DMX Mode.
To run the 6 Channel Mode, press the MODE button until "Ch.06"
is displayed. This is the 6 Channel DMX Mode.
To run the 7 Channel Mode, press the MODE button until "Ch.07"
is displayed. This is the 7 Channel DMX Mode.
To run the 8 Channel Mode, press the MODE button until "Ch.08"
ADJ Products, LLC - www.adj.com - Flat Par QA5XS User Manual Page 9
Operating Instructions
Advertisement
Table of Contents
