Advertisement
WiFly QA5 IP
WiFly QA5 IP
Dim m er
Dim m er
Dim m er
Dim m er
1 0 0 % % % %
1 0 0
1 0 0
1 0 0
5 0 5 0 5 0 5 0 % % % %
1 0 1 0 1 0 1 0 % % % %
0 0 0 0
T
ris e
DMX delay
Trise(ms)
Delay mode
dr-0
dr-1
dr-2
dr-3
dr-4
ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 24
Photometric Chart
Dimmer Curve Chart
T
d o w n
Tdown(ms)
0
0
800
1300
1010
1560
1200
1950
1280
2600
WiFly QA5 IP
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 15 fixtures maximum. After the maximum fixtures
has been reached you will need to use a new power outlet. They
must be the same fixtures. DO NOT mix fixtures.
WiFly QA5 IP
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
2. Make sure that Sound Active mode is activated.
WiFly QA5 IP
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
t t t t
1. Use normal glass cleaner and a soft cloth to wipe down the
( ( ( ( m s
m s ) ) ) )
m s
m s
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
ADJ Products, LLC - www.adj.com - WiFly QA5 IP User Manual Page 25
Power Cord Daisy Chain
Trouble Shooting
Cleaning
Advertisement
