Custom Scan Sizes menu
Menu item
Custom Scan Size [x]
Scan Size Name
Width
1–11.69 inches (25–297 mm)
Height
1–17 inches (25–432 mm)
Orientation
Portrait
Landscape
2 scans per side
Off
On
Universal Setup menu
Menu item
Units of Measure
Inches
Millimeters
Portrait Width
3–48 inches
76–1219 mm
Portrait Height
3–48 inches
76–1219 mm
Description
Specifies a custom scan size name, scan sizes, and options. The custom scan
size name replaces Custom Scan Size [x] in the printer menus.
Notes:
•
11.69 inches is the US factory default setting for Width. 297 millimeters
is the international factory default setting for Width.
•
17 inches is the US factory default setting for Height. 432 millimeters is
the international factory default setting for Height.
•
Portrait is the factory default setting for Orientation.
•
Off is the factory default setting for 2 scans per side.
Description
Identifies the unit of measure
Note: Inches is the US factory default setting. Millimeters is the
international factory default setting.
Sets the portrait width
Notes:
•
11.69 inches is the US factory default setting. Inches can be
increased in 0.01‑inch increments.
•
296.9 mm is the international factory default setting. Millimeters
can be increased in 1‑mm increments.
•
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
Sets the portrait height
Notes:
•
48 inches is the US factory default setting. Inches can be increased in
0.01‑inch increments.
•
1219 mm is the international factory default setting. Millimeters can
be increased in 1‑mm increments.
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
Understanding printer menus
159