Incorrect Paper Type, Check [Paper Source]; 35 Insufficient Memory To Support Resource Save Feature; 36 Printer Service Required; 37 Insufficient Memory To Collate Job - Lexmark X950 Series User Manual

• Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper
is large enough for the data being printed.
•
Cancel the print job.

34 Incorrect paper type, check [paper source]

Try one or more of the following:
•
Load the appropriate paper or specialty media in the proper tray.
•
Confirm that the wheel on Tray 1 is set to the paper type loaded in the tray. Make sure the paper type matches the
document you are trying to print.
•
Touch Continue to clear the message and print using a different tray.
•
Check the tray length and width guides and make sure the paper is loaded properly in the tray.
•
Make sure the correct paper size and type are specified on the Print Properties or Print dialog settings.
•
Check that the paper type is correctly set. For example, if the MP Feeder Type is set to Universal, then make sure
the paper is large enough for the data being printed.
•
Cancel the print job.

35 Insufficient memory to support Resource Save feature

Try one or more of the following:
•
Touch Continue to disable Resource Save and continue printing.
•
To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit the
menus to activate the link buffer changes. When Ready appears, enable Resource Save.
•
Install additional memory.

36 Printer service required

Touch Continue to clear the message or contact customer support.

37 Insufficient memory to collate job

Try one or more of the following:
•
Touch Continue to print the portion of the job already stored and begin collating the rest of the print job.
•
Cancel the current print job.

37 Insufficient memory for Flash Memory Defragment operation

Try one or more of the following:
•
Touch Continue to stop the defragment operation and continue printing.
•
Delete fonts, macros, and other data in printer memory.
•
Install additional printer memory.
Troubleshooting
305