Paper Transport - Lexmark X950 Series User Manual

Notes:
• The finisher shown is the booklet finisher. Bin 2 is available only when the booklet finisher is installed.
• All paper tray capacities are based on 75‑g/m

Paper transport

•
The paper capacity is 50 sheets.
•
Finishing options are not supported in this bin.
•
Envelopes are routed here.
• Universal paper is routed here when it is longer than 483 mm (19 in.) or shorter than 148 mm (6 in.).
Finisher standard bin
• The paper capacity is 500 sheets.
• Envelopes and executive‑size paper are not supported in this bin.
• Finishing options are not supported in this bin.
Bin 1
•
The paper capacity is 3,000 sheets when the standard finisher is installed.
•
The paper capacity is 1,500 sheets when the booklet finisher is installed.
Bin 1 finishing features
Size
Punch
A3
A4
A5 X
Executive
Folio X
JIS B4
JIS B5
Legal X
Letter
Statement X
*
For the Universal paper size, the finishing edge must be at least 9 in. (229 mm) for a 3‑hole punch and 10 in. (254 mm) for
a 4‑hole punch.
Punch—Select from two‑, three‑, or four‑hole punch
Single staple—Use only one staple
Double staple—Use two staples
Double dual staple—Use two sets of two staples. This setting is supported only for widths between 8 in. (203 mm) and
12 in. (297 mm) with lengths between 7 in. (182 mm) and 17 in. (432 mm).
2
(20‑lb) paper.
* Offset
X
X
Paper and specialty media guidelines
Single/Double staple
X
X
93
Double dual staple
X
X
X
X
X
X