Updating the base firmware
Whenever there are new or improved functions for your Gigaset base, firmware
updates are made available on the Internet for you to download directly (without a
PC) to your base.
You need a router to connect the base to the Internet, which is connected via a
modem (may be integrated in the router) to the Internet, and an Ethernet cable
(Cat 5 with 2 RJ45 Western modular plugs).
Please note
New versions of the handset firmware can be loaded onto your handset using
the "Gigaset QuickSync" program for your PC (
Connecting the base to the router/Internet (optional)
Your base has a LAN connection that you can use to connect the base to a router.
Please note
This user guide describes the functions for the SL910/SL910A as supplied (other
functions may be added later through firmware updates).
If the firmware update results in operational changes, a new version of this user
manual or the necessary amendments will be published on the Internet at:
www.gigaset.com./gigasetsl910
where you will find a link to the user manual.
About the version of the firmware currently loaded (
Connecting the base to the local network (router)
For this, your base requires an IP address in the local network. There are two possi-
bilities.
u
Dynamic assignment: The router's DHCP server automatically assigns an
IP address to the phone. This may change depending on router settings.
The DHCP server on the router must be activated;
B
A
Updating the base firmware
¢
page 96).
¤
Connect one Ethernet cable plug
into the LAN socket at the side of
the base
.
A
¤
Insert the second Ethernet cable
plug into a LAN socket on the
router
.
B
¢
page 89).
81