Setting Up The Base And Handset - Installation Wizard - Gigaset SL910 User Manual

Setting up the base and handset – installation wizard
Once the handset has been charged sufficiently, the installation wizard starts auto-
matically. It helps you to configure the following key settings on the handset and
base, which are required for operation:
u
Time and date
u
Display language
u
Country in which the phone will be used
u
Your own area code
L
Time
00:00
Date
01.04.2010
Display Language
English
Country
United Kingdom
Area (Dial Code)
(Not configured)
Skip Settings
L
Time
Time Format
16
Welcome
õ
Save Setting
Time
22 58
23 59
00 00
:
01 01
02 01
24 hrs 12 hrs
2
If you do not want to configure the set-
tings at this point:
¤
M
Touch the [
at the bottom of the display.
M
The handset then switches to idle status.
You can configure the settings at a later
stage using the Settings menu on your
M
handset.
M
To configure the settings:
¤
Touch the ' icon next to the time to
M
set the time.
‰
¤
Use the left-hand number wheel to
select the current hour by touching the
number wheel with a finger and mov-
ing it upwards or downwards. The
number wheel will follow your move-
ments.
¤
Operate the right-hand number wheel
in the same way to select the minutes.
¤
Specify whether you wish the time to
be displayed in 12 hrs or 24 hrs mode.
To do this, touch the corresponding
area under Time Format.
The current setting is highlighted.
¤
Touch the ' icon (at the top left of the
display) to return to the Welcome
page.
õ
Skip Settings] option