Consultation Call - Gigaset SL910 User Manual

Using consultation call, call swap
u
Call a second external caller (consultation call)
u
Switch between two calls (call swap)

Consultation call

Making another external call during an external call. The first call is placed on hold.
¤
P
Touch [ Consultation] and then External.
Confirm with è.
¤
number.
The previous call is placed on hold. You are connected to the second participant.
¤
If the second party does not answer: Touch
Ending the consultation call
¤
Touch / next to the consultation call. You are reconnected to the first call par-
ticipant.
Or:
¤
Press a. You receive a recall from the first participant.
Call swapping
Prerequisite: You are conducting an external call and have called a second partici-
pant (consultation call) or have accepted a waiting call.
The numbers or names of both participants are shown in the display. The partici-
pant, with whom you are currently not speaking, is greyed out.
¤
Touch the greyed out entry to switch to this participant.
Ending the active call
¤
Switch to the participant with whom you wish to end the call.
to the relevant display. You are re-connected to the waiting caller.
Or:
¤
Press a. You receive a recall from the participant who was previously waiting.
¤
Press the talk key c.
Making calls via network services
¤
Enter the second participant's
À
at the bottom of the display.
Touch / next
¤
41