Connecting The Base To The Pabx; Recall And Dialling Mode; Saving An Access Code (Outside Line Code) - Gigaset SL910 User Manual

Connecting the base to the PABX

Connecting the base to the PABX
To find out which settings are required for your PABX, please refer to the PABX user
guide.
You cannot send or receive SMS messages on PABXs that do not support Calling
Line Identification.

Recall and dialling mode

Changing the dialling mode
¤
In the Settings menu (
¤
Touch ' next to Dialling Mode.
cedure (Pulse) (
Setting recall
¤
In the Settings menu (
¤
Touch ' next to Recall.

Saving an access code (outside line code)

If you have to enter an access code before any external number on your PABX,
e.g., "0":
¤
In the Settings menu (
¤
Touch the ' next to Access Code.
Confirm with è.
¤
¤
Touch the ' next to Use.
Never: Deactivate access code.
Calls from Call Lists: The access code should only be prefixed when dialling
from a list (SMS, calls, answering machine (SL910A)).
All Calls: The access code should be prefixed to every number.
84
¢
page 24), touch [ « Telephony].
¤
Select tone dialling (Tone)/pulse dialling pro-
Ø
= set value).
¢
page 24), touch [ « Telephony].
¤
Select recall (
¢
page 24), touch [ « Telephony].
¤
¤
Select one of the following values (Ø = set value):
Ø
= set value).
Enter the access code (max. 3-digit).