Setting The Ringtone; Adjusting The Loudspeaker Volume; Setting The Handset Volume - Gigaset 5040 Quick Manual

Setting the ringtone

Ten different ringtones can be set for the ringer (default
setting: ringtone 9).
To set when the telephone is idle:
º7
Hold down the Set key. Initiate function.
0 9
... Press one of the keys 0 ... 9.
º
Hold down the Set key.
To set while the telephone is ringing:
0 9
... Press one of the keys 0 ... 9.

Setting the handset volume

The volume on the handset can be set to one of 3 levels
and saved (default setting: level 1).
Lift the handset and press
The last value set is saved.
Mute
You can deactivate the telephone's handset and
microphone. Then the other party can no longer hear
you.
J
During a call: Press the Mute key
Activate again: Press the key again.
Activating/deactivating the mute melody
You can activate and deactivate the mute melody for the
mute (default setting: on).
º19#
Hold down the Set key. Initiate function.
Press the Hash key.
0 1
/ 0: deactivate; 1: activate.
º
Hold down the Set key.
H I
... .
7
en

Adjusting the loudspeaker volume

While in handsfree mode, you can set the volume to one
of 7 levels and save it (default setting: 1).
H I
... Adjust the volume with the Loud/Quiet key.
Activating/deactivating the telephone lock
The telephone can be locked so that it cannot dial any
phone numbers (with the exception of a baby call
phone number if set). You can continue to receive
incoming calls.
#
Hold down the Telephone lock key.
Press it again to unlock the telephone.
When the telephone is locked, you will see the
bol in the display.
Baby call (direct call) number setting
The Baby Call function only works when the telephone
is locked. If a phone number is set for the Baby Call func-
tion it will be dialled when you lift the handset (or press
#
the loudspeaker key) and then press any key (except
holding down
other phone numbers to be dialled, but incoming calls
can be received.
º8
Hold down the Set key. Initiate function.
o
Enter direct call number (max. 32 digits).
º
Hold down the Set key.
When the Baby Call function is activated and the tele-
phone is locked, you will see the
the display.
Deactivating
Baby Call is deactivated when you deactivate the tele-
phone lock.
). The telephone does not allow
ƒ {
and symbols in
{
sym-