Connecting The Dvr - Honeywell HRG4 Getting Started Manual

HRG8
HRG16
Position Connection/Switch
Main Video Out
1
Local Video Out
2 Video In
3 Audio In
4 Line In
5 Audio Out
6 RS-232 Port
7 VGA
8 LAN
9 USB
10 RS-485 Port
Alarm In
11
Alarm Out
12 12 V
13 Power
14 GND

Connecting the DVR

Connecting to Alarm Inputs/Outputs
Connect the alarm inputs and outputs as shown below:
HRG4 model shown
Document 800-12006V2 Rev A
07/2012
Function
BNC connectors for analog video input.
BNC connectors for local video out
BNC connectors for analog video input.
RCA connectors for analog audio input.
RCA connector for audio input.
RCA connector for audio output.
DB9 connector for RS232 devices.
DB15 connector for VGA output. Display local video output and menu.
Connector for LAN (Local Area Network).
Connector for USB devices.
Connector for RS-485 devices. T+, T- pins connect to PTZ.
Connector for alarm input.
Connector for alarm output.
12 V DC power supply.
Switch for turning On/Off the device.
Ground (needs to be connected when DVR starts up).
7