Honeywell FUSION User Manual page 110

FUSION DVR Digital Recording and Transmission System
7.5 UNDERSTANDING TOURS, CONTINUED
1
2
3
4
5
6
7
7–8
Tour Method These options define the type of Tour to use.
Preset Tour The Preset Tour cycles through recorded Presets. For Ex.
If Presets 1,2,4,6 and 9 are defined, then the Tour will cycle
as such... 1,2,4,6,9,1,2,4,6,9,1,2...etc.
The default cycle time is 5 seconds.
Preset Tour 2 This option works the same as the standard Preset Tour
with the addition of a definable Travel Speed and Dwell
Time. The Dwell and Travel speed can be defined for each
preset by accessing and setting these options in the PTZ
camera menu.
Mimic Tour This Tour 'mimics' a user-defined motion path, copying
everything the user does (including speed).
Pan Swing/ This option enables the Horizontal (Pan) or Vertical (Tilt)
Tilt Swing 'Guard Tours'.
Sequence This is a Tour method that allows a user to select a Preset
Sequence from a Drop-Down list. This list is only displayed
on supported Protocols.
Start/Stop These options describe how to define a Mimic Tour. The
Position Start Position button begins the 'recording' process. The
Stop Position button ends it.
Privacy Zone The Privacy Zone is a definable area that is masked out so
it cannot be viewed.
Travel Speed This option defines the speed at which a PTZ moves from
one Preset position to the next (when using Preset Tour 2).
This option defines the length of time (in seconds) that a
Dwell Time
PTZ Tour stays on a Preset Position. Moves from one
Preset position to the next (when using Preset Tour 2).