Table of Contents
Advertisement
NATIONAL POWER DEVIATION STANDARDS
AUSTRALIA / NEW ZEALAND
COMPONENTS COMPLY WITH THE RELEVANT PORTIONS OF IEC 60950 OR THE
APPLICABLE COMPONENT STANDARD OR THE RELEVANT AUSTRALIAN / NEW ZEALAND
STANDARD.
AC POWER DISTRIBUTION SYSTEMS CLASSIFIED AS TT OR IT ARE NOT ALLOWED
INTENDED FOR USE ON A TN SYSTEM.
--------------------------------------------------------------------
Rated
Nominal
Current of
cross-sectional
Equipment
area
(A)
(mm²)
--------------------------------------------------------------------
0.2
<=
3 0.5*
3
<=
7.5 0.75
7.5
<=
10 (0.75) 1.00
10
<=
16 (1,0) 1.5
16
<=
25 2.5
25
<=
32 4
32
<=
40 6
40
<=
63 10
63
<=
80 16
80
<=
100 25
100
<=
125 35
125
<=
160 50
160
<=
190 70
190
<=
230 95
DENMARK
CERTAIN TYPES OF CLASS I APPLIANCES MAY BE PROVIDED WITH PLUG NOT
ESTABLISHING EARTHING CONTINUITY WHEN INSERTED INTO DANISH SOCKET-OUTLETS.
FOR TILSLUTNING AF DE ØVRIGE LEDERE, SE MEDFØLGENDE
SUPPLY CORD OF SINGLE-PHASE EQUIPMENT HAVING A RATED CURRENT NOT
EXCEEDING 13 A SHALL BE PROVIDED WITH A PLUG ACCORDING TO THE HEAVY
CURRENT REGULATIONS, SECTION 107-2-D1. CLASS I EQUIPMENT PROVIDED WITH
SOCKET-OUTLETS WITH EARTH CONTACT OR WHICH ARE INTENDED TO BE USED IN
LOCATIONS WHERE PROTECTION AGAINST INDIRECT CONTACT IS REQUIRED ACCORDING
TO THE WIRING RULES SHALL BE PROVIDED WITH A PLUG IN ACCORDANCE WITH
STANDARD SHEET DK 2-1A OR DK 2-5A. IF POLY-PHASE EQUIPMENT AND SINGLE-PHASE
"VIGTIGT !
LEDEREN MED GRØN/GUL ISOLATION MÅ KUN
TILSLUTTES EN KLEMME MÆRKET
(IEC 417, NO. 5019) ELLER (IEC 417, NO. 5017)
INSTALLATIONSVEJLEDNING
Advertisement
Table of Contents
