Honeywell FUSION User Manual page 107

7.3 ADVANCED PTZ SETUP, CONTINUED
1
2
3
4
5
6
7
8
9
10
11
12
Camera Menu
On-Screen Compass
RS-232 / RS-485
Select Camera
Port Settings
Enable Pan/Tilt
Preset and Tour
Protocol
PTZ Status on Close
Address Setting
Open PTZ Controller
Pan Speed
Tilt Speed
Zoom Speed
Focus Speed
Opens the OSD PTZ camera menu.
Allows On-Screen control of a PTZ camera.
Defines how to send the PTZ signal to the camera.
Selects the current camera to be edited.
Defines the specific settings to transmit to the PTZ.
Enables the DVR to control the PTZ camera.
Used to create Presets and Tours for the PTZ
camera. Since each camera creates these in a
different way, there can be multiple methods.
Selects the protocol to use for the selected camera.
The protocol is the unique set of instructions that
allows the DVR to communicate with the PTZ
camera.
This option will activate a Tour or Preset when the
PTZ controller is closed.
Only available on select PTZ cameras. These options
need to be set when there are more PTZ cameras
connected together than there are inputs on the
DVR. Setting these options allows for attaching
several DVRs to the PTZ chain.
Opens the PTZ controller, allowing the PTZ camera
to move.
Increases or decreases the Pan speed.
Increases or decreases the Tilt speed.
Increases or decreases the Zoom speed.
Increases or decreases the Focus speed.
PAN / TILT / ZOOM
7–5