Specifications - Makita KP0810 Instruction Manual

ENGLISH

SPECIFICATIONS

Shiplapping depth
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for planing wood.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model KP0810
For European countries only
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level: 87 dB (A)
sound power level: 98 dB (A)
Uncertainty: 3 dB(A)
Wear ear protection.
The typical weighted root mean square acceleration
Model
Planing width
Planing depth
-1
)
Overall length
Net weight
Safety class
equipment and
environmentally compatible
KP0810
16,000
3.2 kg
END201-3
value is not more than 2.5 m/s
These values have been obtained according to
EN60745.
For Model KP0810C
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 84 dB (A).
Uncertainty is 3 dB(A).
The noise level under working may exceed 85 dB (A).
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
These values have been obtained according to
its
EN60745.
EC-DECLARATION OF CONFORMITY
Model; KP0810/ KP0810C
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
ENE001-1
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
ENF002-1
000230
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
ENG005-2
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
2
KP0810C
82 mm
4 mm
25 mm
12,000
290 mm
3.3 kg
/II
2
.
Wear ear protection.
2
.
CE2006
Tomoyasu Kato
Director
ENG003-2
ENH101-7