Section 8: Commissioning Of Videoblox System; General Description; Figure 8.1: System Block Diagram - Honeywell MAXPRO-Net Commissioning Manual

COMMISSIONING OF VIDEOBLOX SYSTEM
8.1

GENERAL DESCRIPTION

The VideoBloX system is a range of compatible building blocks for use in video
surveillance and monitoring systems. VideoBlox devices can be configured and
controlled from MAXPRO-Net.
MAXPRO-Net provides direct control of the VideoBloX video input modules, video output
modules, titled video output modules, MVT for Pre-Titling, PIT 422 for controlling PTZ
cameras, I
devices. In addition, it provides a command set for third party developers to readily
access certain functionality of the VideoBloX matrix switcher.
The following figure depicts the block diagram of the System:
Rev. B
SECTION 8:
2
C IN for alarm management and I

Figure 8.1: System Block Diagram

2
C OUT for auxiliary control of other
8-1 HMXMC001013
31-Mar-06