Table of Contents
Advertisement
LCD Mode
Rev. B
CCTV Keyboards
Selecting the LCD MODE field allows for configuration of the LCD display
mode required for this keyboard. Click on a selection field to select that mode
and clear the other selections. When the box to the left of the selection
contains a check mark, the mode is selected. The possible selections are
described below.
No Auto LCD support – the MAXPRO-Net video system will not automatically
send text to the keyboard LCD.
Monitor / Camera – the video output device description text, and the video
input channel device description are displayed on the LCD.
Camera / Time–Date – the video input device description and the current time
and date are displayed on the LCD.
Current Alarm – the active alarm description as displayed on the currently
selected video output device is displayed on the LCD.
Message Mode – the message prompt and mode information lines (eg.
Warning messages, scanning, setting views etc) are displayed on the
LCD.
After selecting the desired mode, click on the OK button. To exit the dialog
box without changing the current mode, click on Cancel.
6-24
HMXMC001013
31-Mar-06
Advertisement
Table of Contents
