Table of Contents
Advertisement
VCR
Logging VCRs
SETTNGS,
CONT.
Bank Number
Specify the standby VCR bank in this field, valid values are 1 – 9.
Logging VCR Number
These fields allow for the definition of which Logging VCRs reside in each bank, valid VCR
numbers are 1 – 9999 (N.B. the VCR number = the monitor number being recorded by the
logging VCR).
Manual Start Input
Where Tape change sequencing is to be initiated manually, this field is used to define the
external alarm input, which will be used to begin Tape change operations on this bank.
Upon entry of a value into this field, SetMax will automatically add the appropriate definitions
to the 'External Alarm Inputs' table. The range of valid entries is 1 – 9999; the default value is
0 indicating Tape change operations are automatically initiated.
Rev. B
VCR Management
Selecting the Logging VCRs 'Display' tab displays the
following properties page.
6-68
HMXMC001013
31-Mar-06
Advertisement
Table of Contents
