Table of Contents
Advertisement
TRENDnet User's Guide
Setup Wizard
1. Log into your access point management page (see
management
page" on page 9).
2. Enter a new password and verify the password by entering a second in in the
"Confirmed Password" field. Click Next.
Note: If this is the first time accessing the access point configuration, the wizard should
automatically appear. If the wizard does not appear automatically, click Main and then
© Copyright 2014 TRENDnet. All Rights Reserved.
"Access your access point
click Wizard. For security purposes, you are required to change the admin password
during the initial setup.
3. For added security, the Wi-Fi Name (SSID) and WiFi Key or encryption key have been
preconfigured with unique settings. The wizard will list your preconfigured Wi-Fi settings
in the confirmation window. You can also find these preconfigured settings on the
"Preset Wireless Settings" sticker or on the device label on the back on the device. You
will need to use this information to connect your wireless devices to your access point.
To change the Wi-Fi key, please refer to the section Secure your Wireless Network on
page 11. If the access point is reset to factory defaults, the Wi-Fi Key and Wi-Fi Name
will reset to the preconfigured default settings.
TPL-410AP / TPL-410APK
10
Hide quick links:
Advertisement
Table of Contents
