Check The Access Point System Information - TRENDnet TPL-410AP User Manual

TRENDnet User's Guide

Check the access point system information

Status > Information
You may want to check the system information of your access point such as IP address
settings, access point mode, wireless and wired network settings, access point wireless
MAC addresses, and firmware version.
1. Log into your access point management page (see
management page" on page 9).
2. Click on Status and click on Information.
System Information
• Firmware Version – The current firmware version your access point is running.
• Build Day - The build day and time of the current firmware version your access
point is running.
• System Up Time – The duration your access point has been running continuously
without a restart/power cycle (hard or soft reboot) or reset.
Powerline Interface
• MAC Address: The MAC address of your access point's powerline interface
configuration.
© Copyright 2014 TRENDnet. All Rights Reserved.
"Access your access point
Ethernet Information
• IP Address – The current IP address settings assigned to your access point.
• Subnet Mask - The current subnet mask assigned to your access point.
• Default Gateway – The current gateway assigned to your access point.
• MAC Address: Displays the current Ethernet wired interface MAC address.
Wireless LAN
• Wireless OP Mode: Displays the current wireless mode.
• Name (SSID): Displays the current wireless network name assigned to your access
point.
• Channel – Displays the current wireless channel your access point is operating.
• Security Mode: Displays the wireless security type applied.
• MAC Address: The MAC address of your access point's wireless LAN or interface
configuration.
TPL-410AP / TPL-410APK
27