Change Your Access Point Ip Address - TRENDnet TPL-410AP User Manual

Powerline 500 wireless kit and powerline 500 av wireless access point
Hide thumbs Also See for TPL-410AP:
Table of Contents

Advertisement

TRENDnet User's Guide

Change your access point IP address

Main > Network Settings
Typically, the access point IP address settings only needs to be changed when
connecting the access point to your network and configuring to the device to be in the
same IP network as your existing network.
Default Access Point IP Address Settings: 192.168.10.100 / 255.255.255.0
1. Log into your access point management page (see
management
page" on page 9).
2. Click on Main, and click on Network Settings.
3. Under LAN Interface Setup, review the settings.
• Dynamic IP : Check this option to set the access point to automatically obtain IP
address settings from a DHCP server .
Note: Typically, your network router has a built-in DHCP server.
• Static IP: Uncheck the Dynamic IP option to manually specify an IP address in the
IP Address, Subnet Mask, and Default Gateway fields.
IP Address: Enter the new access point IP address. (e.g.
192.168.0.100)
Subnet Mask: Enter the new access point subnet mask. (e.g.
255.255.255.0)
Gateway Address: Enter the default gateway address of your network.
This parameter is required for the access point to access Internet for
functions such as e-mail notifications.
Note: Typically, your network router IP address is used as the default
gateway address to access the Internet e.g. 192.168.10.1)
Note: Typically, your network IP address is used as the DNS server
address.
© Copyright 2014 TRENDnet. All Rights Reserved.
"Access your access point
4. To save changes, click Save. When prompted to Save or Continue, you can click Save
to apply the changes or click Continue to additional changes in the access point
management page before saving.
Note: You will need to access your access point management page using your new
access point IP address. (e.g. Instead of using the default
new access point IP address will use the following format using your new IP address
http://(new.ipaddress.here) to access your access point management page.
TPL-410AP / TPL-410APK
http://192.168.10.100
your
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tpl-410apk

Table of Contents