Repeating A Previous Installation; To Not Save Installation Settings - 3Com EtherLink III ISA User Manual

Repeating a Previous Installation

You can save the configuration settings and test options that you
selected during this installation for use in future installations.
Saving settings is optional.
When you click Next in the previous section, the Repeat Last
Installation screen appears, as shown in Figure 3-13.
Figure 3-13 Repeat Last Installation Screen

To Not Save Installation Settings

Follow these steps if you do not want to save these configuration
settings:
1 Select the No radio button, and then click Next.
The Installation Complete screen appears, as shown in
Figure 3-16.
2 Click Finish.
Go to "Windows 95" if you are running Windows 95 on your PC.
Go to "Windows NT" if you are running Windows NT on your PC.
Repeating a Previous Installation 3-13