Table of Contents
Advertisement
2
BASIC OPERATION
■ User Set mode
The User Set mode can be accessed with the 'Power ON'
function. In this case, all set mode items are selectable.
The User Set mode allows you to set seldom-changed set-
tings, and you can "customize" the transceiver operation to
suit your preferences and operating style.
Entering the User Set mode:
q Push [ ] to turn OFF the power.
w While holding down [P1] and [P2], push [ ] to turn ON the
power.
• Hold down [P1] and [P2] continuously until it turn ON.
e Hold down [P0] for 1 second to enter the User Set mode.
• Hold down [P0] for 1 second again to exit the User Set mode.
[P0]
10
1
2
3
4
TX/RX
[P1] [P2]
[
]
1
2
3
4
TX/RX
r Push [P0] several times to select the appropriate item.
Then, push [P2] or [P3] to set the desired level or setting.
• Selectable set mode functions are Backlight, Beep ON/OFF
setting, Beep Level, SQL Level, AF Min Level, Mic Gain,
Horn, Signal Moni and Lone Worker.
• The Channel indicator and Activated key indicator light to show
the selected item.
1
2
3
4
TX/RX
[P0]
[P2] [P3]
t Hold down [ ] for 1 second to turn OFF the power, then
ON again to return the normal operating mode.
1
2
3
TX/RX
The User Set mode can also be selected using a program-
mable key. Please refer to the [User Set Mode] section on
page 5 for instructions on how to use the key assigned to the
User Set mode.
[User Set Mode] can be used for quick item selection. Set
"Enable" for the often used items with the CS-F3020/F5010/
F5020
.
CLONING SOFTWARE
Channel indicator
Activated key
indicator
4
[
]
Hide quick links:
Advertisement
Table of Contents
