Figure 2-19a-d Attaching the KVH-provided F-connector
Figure 5-2
Figure 5-5
Figure 5-6
List of Tables
Table 1-1
Table 2-1
Table 2-3
Table 2-2
Table 3-1
Table 4-1
Table 5-1
Table A-1
Table C-1
Table C-2
Table F-1
Table F-2
Table F-3
Table F-4
iv
to an RF Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-12
Remote Dish Wiring Configuration . . . . . . . . . . . . . . . . .2-14
Antenna, PCB, and Rotating Plate . . . . . . . . . . . . . . . . . .5-3
Close-up of Linear Actuator, Pivot Bracket, and Pin . . . . .5-3
Close-up of RF Detector, PCB, and Cover . . . . . . . . . . . .5-4
PCB Connector Locations - Rear View (not to scale) . . . .5-5
Attaching the Shipping Restraints to the
Antenna Baseplate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-9
Securing the Forward Shipping Restraint . . . . . . . . . . . . .5-9
DB9 Male and Female Connector Arrangement . . . . . . . .C-2
TracVision SA Packing List . . . . . . . . . . . . . . . . . . . . . .1-3
Kitpack Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2
DSS On-screen Messages . . . . . . . . . . . . . . . . . . . . .2-13
TracVision SA Operational Messages . . . . . . . . . . . . .2-13
TracVision SA Automated Procedures . . . . . . . . . . . . . .3-1
Troubleshooting Matrix . . . . . . . . . . . . . . . . . . . . . . . . .4-1
Field Replaceable Units . . . . . . . . . . . . . . . . . . . . . . . .5-2
TracVision SA System Specifications . . . . . . . . . . . . . .A-1
Alternate Wiring Arrangement for TracVision SA
Data Cable to DB15 (15-wire) Connector . . . . . . . . . . .C-1
DB9 Pin Functions and Color Code . . . . . . . . . . . . . . .C-2
System Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . .F-1
Manual Positioning Commands . . . . . . . . . . . . . . . . . . .F-2
Operational Commands . . . . . . . . . . . . . . . . . . . . . . . .F-3
Target and Signal Commands . . . . . . . . . . . . . . . . . . . .F-4