Gather Telephone Information - Multitech MultiVOIP MVP2400 User Manual

Quick Start Instructions
Phone/IP Details *Absolutely Needed*

Gather Telephone Information

E1 Phone Parameters
Ask phone company or
PBX maintainer.
@
Which frame format is used?
Which CAS or PRI protocol is used? ______________
Clocking: Does the PBX or telco switch use
internal
Note that the setting used in the voip unit will be the
opposite of the setting used by the telco/PBX.
Which line coding is used?
Pulse shape level?: (most commonly 0 to 40 meters)
Gather Telephone Information
Analog Phone Parameters
Ask phone company or
telecom manager.
@
Which interface type (or "signaling") is used?
If FXS, determine whether the line will be used for a
phone, fax, or KTS (key telephone system)
If FXO, determine if line will be an analog PBX
extension or an analog line from a telco central office
If E&M, determine these aspects of the E&M trunk
line from the PBX:
What is its Type (1, 2, 3, 4, or 5)?
Is it 2-wire or 4-wire?
Is it Dial-Tone or Wink?
Info needed to operate:
E1 Telephony Parameters:
Record for this VOIP Site
Double Frame
MultiFrame w/ CRC4
MultiFrame w/ CRC4 modified
or clocking? _________________
external
___ or
AMI
Analog Telephony Interface Parameters:
Record for this VOIP Site
E&M _____ FXS/FXO _____
30
MultiVOIP User Guide
(cont'd)
MVP3010
_____
_____
_____
___
HDB3
Needed for:
MVP810
MVP410
MVP210