Maintenance; Maintenance Table; Maintenance Display System; Remaining Toner Indication - Sharp AR-168S Service Manual

[11] MAINTENANCE

1. Maintenance table

Section
Developing Developer
DV blade
DV side seal (F/R)
Process peripheral Drum

2. Maintenance display system

Toner Life
Remaining quantity
LED
Machine
Developer Life
LED
Machine
Maintenance LED
Machine

3. Remaining toner indication

TONER FULL
100%
100-90% 89-75%
• The remaining toner indication is based on the number of revolutions of the toner motor.
• The toner END indication appears when the END is detected by the toner sensor.
: Check (Clean, adjust, or replace when required.)
Parts 25K
NEAR EMPTY
About 10%
ON
Operation allowed
ON at 25K of the developer count.
Selection is available between Not Stop and Stop by Service Simulation (SIM 26-37) Setup.
(If Stop is selected, the LED will flash and stop at 25K.)
Default: Not Stop
Clear: SIM 24-06
Selection is available among 25K, 13K, 9K, 6K, 3K, and free (no lighting) with SIM 21-1.
Default: 25K
Clear: SIM 20-1
Not stop.
Remaining toner indication
75%
50%
74-50% 49-25%
AR-168S/168D MAINTENANCE 11 - 1
: Clean
50K 75K 100K
8K
EMPTY
Flash
Stop
25K
Display for users
25%
24-10% 10%
TONER CARTRIDGE
IS NEAR EMPTY
Displayed on the LCD.
✩
: Replace : Adjust
125K Remark
Lo
LOW LEVEL
10 sheets
REPLACE THE
TONER CARTRIDGE
Displayed on the LCD.
: Lubricate