Sharp AR-168S Service Manual page 99

Main Sub
Contents
code code
46 12 Density adjustment in the
FAX mode (Collective
adjustment) (Executable
only when the FAX is
installed.)
13 FAX mode density
adjustment (normal text)
(Executable only when the
FAX is installed.)
14 FAX mode density
adjustment (Fine text)
(Executable only when the
FAX is installed.)
[Function]
When [START] key is pressed, scan is executed with the entered exposure adjustment value and the
data stored on the FAX side is rewritten into the entered value.
All data of the exposure adjustment values are rewritten into the same value.
For the density adjustment table data, refer to TC46-13 (density adjustment (normal text) in the FAX
mode).
[Operation]
1) Initial display
ADJUST EXP. AUTO
XX
("XX" is the exposure adjustment value of nor-
mal text stored on the FAX side.)
2) Enter a 2-digit value as the exposure adjust-
ment value.
ADJUST EXP. AUTO
YY
("YY" is the entered exposure adjustment
value.)
[Function]
Scan is started with the exposure adjustment value entered with [START] key, and the stored data of
the selected mode on the FAX side is rewritten into the input value.
Density adjustment value data table
Mode Photo
STD (Normal text) off
Fine (Fine text) on
off
Sfine (Super fine) on
off
When initializing each data: 50
[Operation]
1) Initial display
ADJUST EXP. STD
XX
("XX" is the corresponding exposure adjustment
value of normal text mode stored on the FAX
side.)
2) Enter a 2-digit value as the exposure adjust-
ment value with [10KEY].
ADJUST EXP. STD
YY
("YY" is the entered exposure adjustment
value.)
[Function]
When [START] key is pressed, scan is started with the entered exposure adjustment value and the
data of the selected mode on the FAX side is changed to the entered value.
For the density adjustment value table data, refer to TC46-13 (FAX mode density adjustment (normal
text).)
[Operation]
1) Initial display
ADJUST EXP. FINE
XX
("XX" is the corresponding exposure adjustment
value of the fine text mode stored on the FAX
side.)
2) Enter a 2-digit value as the exposure adjust-
ment value with [10KEY].
ADJUST EXP. FINE
YY
("YY" is the entered exposure adjustment
value.)
AR-168S/168D TEST COMMAND, TROUBLE CODES 10 - 19
Details of function/operation
3) Scan is started (self print), and the LED of
[START] key is turned off.
ADJUST
SCAN
4) Print is started (self print).
ADJUST
PRINT
After completion of printing, returns to "2)" dis-
play.
Exposure adjustment value
3) Scan is started (self print), and the LED of
[START] key is turned off.
ADJUST
SCAN
4) Print is started (self print).
ADJUST
PRINT
After completion of printing, returns to "2)"
display.
3) Scan start (self print)
ADJUST
SCAN
4) Print start (self print)
ADJUST
PRINT
After completion of printing, returns to "2)"
display.
EXP. AUTO
YY
EXP. AUTO
YY
EXP. STD
YY
EXP. STD
YY
EXP. FINE
YY
EXP. AUTO
YY