Fusing Section; B. Disassembly Procedure - Sharp AR-168S Service Manual

4. Fusing section

A. List
No. Part name Ref.
1 Thermistor
2 PPD2 sensor
3 Heater lamp
4 Pressure roller
5 Heat roller

B. Disassembly procedure

1) Remove the connectors (3 pcs.) of the rear cabinet.
2) Open the side cover, remove two screws, and remove the fusing
unit.
1)
3)
3) Cut the binding band, remove the screw, and remove the ther-
mistor.
2)
3)
Thermistor
2)
2)
1)
AR-168S/168D DISASSEMBLY AND ASSEMBLY 8 - 7
4) Remove the screw and remove the U-turn guide.
2)
Pressure roller section disassembly
5) Remove the three screws, remove the fusing cover lower on the
right side, and open the heat roller section.
2)
4)
3)
6)
5)
6) Remove the screw and remove the PPD2 sensor.
1)
1)
6)
5)
1)
2)
PPD2 sensor