Image Location; Channel Out - Yamaha YSP-4300 Owner's Manual

Example
Front left channel
With positive focal
lengths

IMAGE LOCATION

If sound from the left and right channels is unnatural, first adjust
the volume of each channel (☞p. 33, 62).
If this does not resolve the problem, adjust left- and right-channel
image location.
Use to adjust the direction from which the front left and right
channel sound is heard so that each sound can be heard closer to
the center channel.
Use this feature to redirect audio signals if the sound coming
from the front left and right channels seems unnatural.
You can adjust this parameter only when "5Beam/Plus2",
"5Beam" or "3Beam" is selected in "Changing the audio output
method for surround playback" (☞p. 36).
Sub menu: ADJUSTMENT
Select "ON" to configure the sound direction.
Selectable item: OFF*, ON
1
Adjust the image location for the front left
channel (LEFT).
The higher the percentage, the louder the output from the
center channel.
Control range: 0%* to 95%
Left-channel sound is
unnatural
Center channel
With negative focal
lengths
With the front left
channel adjusted
2
Adjust the image location for the front
right channel (RIGHT).
The higher the percentage, the louder the output from the
center channel.
Control range: 0%* to 95%
Right-channel sound is
unnatural

CHANNEL OUT

Sub menu: 5.1ch, 7.1ch, AUTO*
Specify the sound beam output method (5.1ch, 7.1ch, AUTO).
When "AUTO" is selected, sound beams are output from the
appropriate number of channels based on input signal as follows.
- 2- or 5.1-channel input: 5.1-channel output
- 6.1- or 7.1-channel input: 7.1-channel output
The available sound beam output methods vary depending upon
the current "CHANNEL OUT" setting (☞p. 36).
Setup menu
With the front right
channel adjusted
61
En